Unit for application of mineral and acrylic fillers, structural plasters, cements, finishing coats, thermal insulation and fire protection systems.
EQUIPMENT
-
60 L stainless steel tank 1 piece Trolley set 1 piece Compressor 1 piece Control panel 1 piece 25 mortar hose 1×10 m 12.5 air connector 1×10 m Spray gun 1 piece 4, 6, 8, 10 flat spray nozzle 1 set Screw Jacket D4-3 1 set Cleaning ball 1 piece g/k connector 2 pieces Screw key 1 piece Wrench 1 piece DTR (Operation and Maintenance Manual) 1 piece
ADDITIONAL (OPTIONAL) EQUIPMENT
*range and output depend on type of plaster distributed and pump used D.
Technical characteristics
Voltage | 230V/50 Hz |
Fuses | 25 A |
Power supply cable | 3×1,5 mm² |
Engine power (variable rotation speeds) | 2,2 kW |
*output | 20 l/min |
Max. pressure | 30 bar |
Max. grain size | 4 mm |
*max. range do | 20 m |
Dimensions | 1190x540x670 |
Tank volume | 60 litrów |
Weight | 110 kg |
Compressor 1,5 kW | 390 l/min |
* efficiency and feeding distance depending on plaster mix and smooth speed control and pump type D
ATTENTION!
BEFORE YOU BUY PLASTERING UNITS WITH POWER- SUPPLY 230V TYPE: KALETA-4/230; KALETA-4S/230; KALETA-6/230; KALETA-6S/230
LEARN MORE ABOUT THEIR INTENDED PURPOSE.
UNITS ARE USED TO APPLY ALL LIGHT MACHINE PLASTERS AND SELF-LEVELLING COMPOUNDS TO GRAIN SIZE 0,3. FOR THESE UNITS RECOMMENDED AND DEDICATED ARE ROTOR AND STATOR D6-3 FIT AND ALL ROTORS AND STATORS FOR 230V.
There are currently no product reviews.
Write ReviewThe owner of the online store does not guarantee that the published opinions come from consumers who have used or purchased a given product.
aggregate for finishing coats and facade plasters Kaleta -151- 230 V
Without Tax: 16 700.00 zł
With Tax: 20 541.00 złControl duct OW 3x1 line with fittings Kaleta 10 m
Without Tax: 260.00 zł
With Tax: 319.80 zł
Control duct OW 3x1 line with fittings Kaleta 10 m
Without Tax: 260.00 zł
With Tax: 319.80 złWąż do zaprawy 25 zakuty 10 m Złączka GK + złączka GK obrotowa
Without Tax: 400.00 zł
With Tax: 492.00 zł