Unit for application of mineral and acrylic fillers, structural plasters, cements, finishing coats, thermal insulation and fire protection systems.
EQUIPMENT
-
60 L stainless steel tank 1 piece Trolley set 1 piece Compressor 1 piece Control panel 1 piece 25 mortar hose 1×10 m 12.5 air connector 1×10 m Spray gun 1 piece 4, 6, 8, 10 flat spray nozzle 1 set Screw Jacket D4-3 1 set Cleaning ball 1 piece g/k connector 2 pieces Screw key 1 piece Wrench 1 piece DTR (Operation and Maintenance Manual) 1 piece
ADDITIONAL (OPTIONAL) EQUIPMENT
*range and output depend on type of plaster distributed and pump used D.
Technical characteristics
Voltage | 230V/50 Hz |
Fuses | 25 A |
Power supply cable | 3×1,5 mm² |
Engine power (variable rotation speeds) | 2,2 kW |
*output | 20 l/min |
Max. pressure | 30 bar |
Max. grain size | 4 mm |
*max. range do | 20 m |
Dimensions | 1190x540x670 |
Tank volume | 60 litrów |
Weight | 110 kg |
Compressor 1,5 kW | 390 l/min |
* efficiency and feeding distance depending on plaster mix and smooth speed control and pump type D
ATTENTION!
BEFORE YOU BUY PLASTERING UNITS WITH POWER- SUPPLY 230V TYPE: KALETA-4/230; KALETA-4S/230; KALETA-6/230; KALETA-6S/230
LEARN MORE ABOUT THEIR INTENDED PURPOSE.
UNITS ARE USED TO APPLY ALL LIGHT MACHINE PLASTERS AND SELF-LEVELLING COMPOUNDS TO GRAIN SIZE 0,3. FOR THESE UNITS RECOMMENDED AND DEDICATED ARE ROTOR AND STATOR D6-3 FIT AND ALL ROTORS AND STATORS FOR 230V.
aggregate for finishing coats and facade plasters Kaleta -151- 230 V
Without Tax: 16 700.00 zł
With Tax: 20 541.00 złControl duct OW 3x1 line with fittings Kaleta 10 m
Without Tax: 260.00 zł
With Tax: 319.80 zł
Control duct OW 3x1 line with fittings Kaleta 10 m
Without Tax: 260.00 zł
With Tax: 319.80 złWąż do zaprawy 25 zakuty 10 m Złączka GK + złączka GK obrotowa
Without Tax: 410.00 zł
With Tax: 504.30 zł